STM 32 Discovery pack FAQ

This article is intended for users with a STM 32 Discovery pack only. In case you have a different device, please visit the main page of this Help Center.

1. STM 32 Evaluation Period
2. Service extension following the evaluation period, or increase of data/SMS volume
3. I cannot connect any more to a network with the STM32 discovery pack
4. I would like to setup a VPN with the STM32 discovery pack
5. How to register multiple STM32 kits on one organisation

STM 32 evaluation period

With your 90-day trial you can enjoy :  

• Cellular connectivity in more than 180 countries with 540 networks
• 1 SIM with 3 EUR credit to use for Data and SMS
• Access to the EMnify User Interface (EUI)
• Access to the EMnify RESTful API
• OpenVPN
• Access to the EMnify Knowledge Base
• Access to the ST Community

Service extension following the evaluation period

I cannot connect any more to a  network with the STM 32 discovery pack

If the evaluation period started already but the SIM cannot connect anymore to any network, it means either your EMnify balance has been depleted or your 90-day trial period has ended. 

I would like to setup a VPN with the STM32 discovery pack

During the evaluation period of your STM 32, you can setup a VPN tunnel via OpenVPN.

OpenVPN is an open-source software that utilizes the security protocol SSL/TLS.  It has strong feature and is know for ease of implementation.It allows customers to authenticate each other using a pre-shared key. OpenVPN works in a client-server mode, meaning OpenVPN users connect to the OpenVPN server and from there have full access to the internet.  

If you want to setup an IPsec VPN, first you must upgrade your account:

How to upgrade your evaluation account 

Cloud connect (IPSec and Transit Gateway) FAQ

How to register multiple STM32 kits on one organisation

If you purchased multiple STM 32 Kits, you can provision and activate an additional embedded SIM on your existing organisation. Please follow the steps to activate it : 

• Connect to http://www.stm32-c2c.com
• Log on your STM account. Already activated Kits can be seen
• Select “Add a new board”
• Enter the voucher
• A new board is created, select then EMNIFY to activate the embedded SIM
• Copy the BIC1 in a text file

Then, log in to the EMnify Portal and register all the BIC1 codes in the SIMs menu