Avatar

Dyanko Tannev

  • Attività totali 42
  • Attività recente
  • Membro dal
  • Segue 0 utenti
  • Seguito da 0 utenti
  • Voti 0
  • Iscrizioni 28

Panoramica attività

Ultima attività di Dyanko Tannev
  • Avatar

    Dyanko Tannev ha creato un articolo,

    Firma elettronica

    EMnify sta utilizzando un software per la firma digitale dei contratti. Per maggiori informazioni sulle firme digitali (E-Signatures) Le consigliamo di visitare: Agenzia per l'Italia digitale Legi...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    Endpoint Connector for waylay.io

    { "name": "emnifyEndpointConnectivitySensor", "version": "0.0.6", "type": "sensor", "script": "// EMnify Endpoint Connectivity Sensor\n\nif (options.requiredProperties.endpointId) {\n ...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    Arduino sketch for GSM data connection using EMnify SIM

    /* Simple HTTP Client over GPRS This sketch establishes a GPRS connection and sends a HTTP request to a hardcoded URL Circuit: * Arduino with GSM shield attached * EMnify SIM card ins...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    How to use a Huawei E3531 in Modem Mode

    Install Raspbian Jessie Download Raspbian Jessie and copy the image to your SD card, see Raspberry PI README for detailed installation instruction. Install needed packages apt-get install ppp u...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    How to create an endpoint?

    You can create and manage your endpoints from the “Endpoints” panel. To create a new endpoint, please press the “Create Endpoint” button in the top right corner. In the dialog that pops up, please ...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    Setting a usage limit for my endpoints

    Service/Usage limits can be set on the service profile. To set up a limit, go to the “Service Profiles” panel, select the desired service profile and then go to the “Usage Limits” tab. Click “Add U...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    The EUI Dashboard

    The Dashboard panel gives you a quick overview of your devices and their connectivity status: Current Month Data Volume: the amount of data consumed by your devices during the current calendar mon...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    What is a “Source address”?

    When sending SMS to your endpoints using the SMS console on the EUI, you need to input a source address. This address will be interpreted by the receiving device, as the source of the message (like...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    I have changed the rate zone configuration on the tariff profile of my endpoint and my device should now be connected to a different MNO, but the endpoint still shows as connected to the old one. Why is that?

    The changes will be applied the next time the device performs a "location update". This could happen at any time depending on the device settings and behavior. In most cases, a quick way to force a...

  • Avatar

    Dyanko Tannev ha creato un articolo,

    Where can I find endpoint traffic statistics?

    To view traffic information of a specific endpoint, you can access the “Endpoints” panel, select an endpoint and then go to the “Stats” tab. You can filter by date and export your data in a .csv file.