Device Configuration
Setting an APN, IMEI lock, IoT Device Certification, etc.
- AT Commands to configure the modem to use CAT-M1 (LTE-M)
- Device configuration guidelines for IMSI Switch handling
- Webinar: introduction to AT Commands
- Arduino sketch for GSM data connection using EMnify SIM
- AT Command sequence for proper network connection / disconnection
- Configuring the APN on a GPS Tracker TK104 family
- Configuring the APN on an Android operated device
- Essentials of the IoT Device Certification
- How to connect you BG96 to Telefonica O2 Germany
- How to set up the EMnify APN in your mobile device
- How to use a Huawei E3531 in Modem Mode
- List of device compatibility
- Manual APN Configuration
- My device's IMEI is different than the one shown in the EUI?
- Programming APN Settings into a GSM Module via AT command
- Router Teltonika RUT955T03XXX Configuration
- Which network selection procedure should I select in my device when using an EMnify SIM card?
- Why is my device's subnet 255.255.255.252?
- Why my Device has hex number “f” in the IMEISV?